Fuel Saver

Product Description

"Jing Hang "Brand
Mobile Fuel Saver

The product is installed on the fuel supply line before the fuel injection engines. By promoting the extent of fuel to gas, the product can greatly reduce the harmful waste gas. It has higher fuel saving rate and can increase engine power output. It can be widely used in vehicles, motor cars, tractors.
CHARACTERS:
Fuel saving efficiency: Fuel saving ratio is 3.2~12%, 23.4% for 50Km/h constant driving. *
Harmful motor tail gas drop evidently: The content of CO, HC, NOx drops 45~55%. *
Improve power output: Power output increase 1.8%. *
Widely used: Used in the systems with fuel or diesel engine, such as vehicle etc.
Clearly efficiency: Longer used, more efficiency, ten years.
Easy installation: The product is made up of two half columns, and they are small and light, without any reconstructing the vehicle fuel system, covering the two columns over the fuel supply line is ok!
Careful manufactory: The material used in the product is precision made and resonance tuned under strict laboratory supervision.
Commitment: Product can refund is customer feel it no use in 2000 Km driving.
NOTES:
* All the date got based on the international standard ECE15.

INSTALLATION
1. Locate the fuel SUPPLY line under pressure feeding the engine from the fuel tank. Vehicles with fuel injection engines normally have two lines running parlay between the fuel tank and the engine, a SUPPLY line and RETUN line. While the engine is running, feel the lines and the colder one of the two will be the SUPPLY line.
2. Simply slip the product over the fuel supply line, up to 20mm-30mm, at an accessible location as close to the carburetor or injection system as possible. Align the product halves so as the side groves are alike. Insert the nylon tie through the grooves that have the tie retainer slot.